Are all 6ft fence panels the same width?
All panels in this category are 6ft wide, but there is an important distinction: some panels are produced in metric and measure 1.8 m rather than the full imperial 6ft (1.83 m). This 3 cm difference rarely affects installation, but it is worth checking the individual product page before ordering if your posts are already set. Heights vary across the range - most panels are available at 6ft height, with some also offered at 3ft, 4ft, and 5ft.
Which type of 6ft panel gives the most privacy?
Full privacy - no gaps at all - comes from the Green and Brown Overlap Panels, the Green and Brown Closeboard Panels, and the Tongue & Groove Panel. Slatted and Venetian panels allow some airflow and light through the gaps, which suits more open settings or where wind loading is a concern. Lattice top panels combine a solid lower section with an open decorative top - useful when you want height without total enclosure above fence level.
What posts and fixings do I need for 6ft fence panels?
Posts should be spaced at 1.83 m (6ft) centres to match the panel width. Concrete slotted posts are a straightforward option - panels slide directly into the slots without additional fixings. Timber posts work equally well with panel clips or screws through the frame. For 6ft-high panels, 100 mm x 100 mm posts are recommended over 75 mm x 75 mm, particularly in exposed positions. Set posts in concrete or post mix with at least 600 mm in the ground, and fit a gravel board at the base to keep the panel off the soil.