Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. We advise that when using Treatex Anti Slip Decking Oi, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. The timber must have a moisture content below 18% and the ambient temperature must be greater than 8oc/<60% humidity during application and drying. Anti Slip Decking Oil has different effects on different surfaces. We strongly advise a trial coat.
Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Anti Slip Decking Oil, allowing approximately 100-165ml per m2. After approximately 8 – 12 hours (avoid moisture exposure during this time) the first coat can be overcoated if required. Apply with a brush or roller a second coat of Anti Slip Decking Oil, again allowing roughly 100-165ml per m2. After the second coat leave for approximately 8-12 hours to dry. The surface can then be used after 24 hours of drying with care. Full hardness will be achieved after 10 days.
Suitable for treated and untreated timbers
Easy to apply
Contains no biocides or toxic ingredients
Safe for use on children’s toys
Suitable for outdoor use
2.5L will cover approximately 17.5m²-25m² in one coat depending on the wood type (rough, sawn, planed). In corrugated timber, consumption may double, due to the increase in surface area.
This website requires essential cookies to work properly. We also store cookies to help us improve this site which you can opt-out of: Cookie settings ACCEPT
Privacy & Cookies Policy